Ford EEC-V PCM Cloning & Programming — Mail-In Bench Service (~1996–2004)
Dead PCM on a 1996–2004 Ford, Mustang, F-150, Ranger, or Crown Vic? Mail in your original plus a hardware-matched donor and we transfer the data on the bench — calibration, VIN, and PATS data where supported. Cloning and programming where supported, verified by service number first.
Sending several modules? Add them all — one box, one return-shipping charge.
Ford EEC-V (104-pin) PCMs, roughly 1996–2004 — F-150, Ranger, Explorer, Expedition, Mustang, Crown Victoria, Bronco, Aerostar, Thunderbird. Mercury / Lincoln / E-Series / 7.3L Power Stroke case-by-case. Verified by VIN + PCM service number before you ship.
How It Works
Three simple steps. Hundreds of mail-in jobs completed for shops, locksmiths, and DIY pros.
Pay & Get Address
Click "Order Now", pay securely via Stripe. We email shipping address + instructions within minutes.
Ship Your Module
Pack per the instructions and ship to Arlington. USPS goes to our PO Box; UPS and FedEx must use the street address. Customer pays shipping to us.
Receive in 1-2 Days
Work completed within 24 hours of receipt. Ships back next business day at the return speed you chose at checkout — standard to overnight. Tracking emailed.
What You Get
- Your original PCM's data transferred to a hardware-matched donor — true clone where the platform supports it
- Or the donor bench-flashed with the correct calibration for your VIN when a full clone isn't supported
- Straight answer BEFORE you ship: true clone, calibration clone, or replacement programming — mapped from your service number
- Bench read + verify of both units before anything is written
- Bench communication test with a stable, regulated power supply
- Clear install notes — including whether a PATS parameter reset or key programming applies at the car
- Modules returned with tracking — return-shipping speed your choice at checkout
Compatibility
Confirm your part matches one of the variants below before ordering. Not sure? Text us a photo and we'll verify.
Advertised coverage (verified first)
Case-by-case after verification
Three possible service results
What we transfer (where supported)
How to identify an EEC-V
Will This Fix My Problem?
Honest answer: here's exactly what this service fixes — and what it doesn't.
Fixes:
- ✓Dead or no-communication PCM on a 1996–2004 Ford and a replacement quote you don't like
- ✓Used PCM installed and the truck cranks but won't start (theft light flashing — PATS mismatch)
- ✓Water-, fire-, or corrosion-damaged PCM that still responds — clone it out before it dies
- ✓Junkyard PCM that needs your calibration and VIN put on it
- ✓No-start PCM replacement where you want the module ready before it goes in
- ✓You want your original tune, VIN, and PATS data carried onto healthy used hardware
Won't fix:
- ✗Does not include the donor PCM — you source a hardware-compatible used unit (we verify the numbers first)
- ✗Does not guarantee a plug-and-play clone on every application — some vehicles require an additional PATS parameter reset or key programming after installation
- ✗Does not repair a PCM that is internally dead — a dead original becomes a replacement-programming job
- ✗Does not fix no-starts caused by fuel pumps, ignition, sensors, wiring, or grounds
- ✗Does not remove PATS — that is our separate Ford PATS delete service
- ✗Does not cover 2005+ Fords (different PCM architecture) — contact us to verify yours
- ✗Does not bypass proof of ownership
Coverage honesty — please read before ordering
EEC-V appeared across Ford, Lincoln, and Mercury for nearly a decade, but connector style, processor, communication protocol, and security storage can differ even within the same model year — the 104-pin connector is a useful identification clue, but it does not guarantee every PCM can be cloned with the same procedure. That is why this service is advertised as cloning and programming WHERE SUPPORTED, never as a guaranteed exact clone for every 1996–2004 Ford. Coverage depends on the PCM hardware number, service number, connector type, and condition of the original module; original and replacement PCM must normally be hardware-compatible; and some vehicles may require an additional PATS parameter reset or key programming after installation. A technician maps your exact job — true clone, calibration clone, or replacement programming — from your VIN and PCM label photos before you ship anything, so you know the outcome before you pay. Proof of ownership is required for any PATS-related work.
Shipping Instructions
These details are also emailed to you the moment your payment clears.
Verify first: text or email us your VIN plus clear photos of your original PCM's service-number label (and the donor's, if you already have one) — a technician confirms hardware compatibility and tells you whether your job is a true clone, calibration clone, or replacement programming before you ship. Then send the original and the donor to PO Box 120241, Arlington TX 76012 if you ship USPS — or 1009 Oakwood Ln # 120241, Arlington TX 76012 if you ship UPS or FedEx (UPS and FedEx cannot deliver to a PO Box). We transfer the data on the bench, test communication, and ship both back via the return option you pick at checkout (Standard $24.95, UPS 2-Day $54.95, or UPS overnight $94.95).
What to include in your box
- Your original PCM (even if damaged — as long as it powers up we can usually read it) AND the donor PCM
- Year, make, model, engine, and transmission (e.g. 2001 F-150 5.4L auto)
- VIN of the vehicle
- PCM service number and hardware (catch) code off BOTH case labels — we pre-verify the match
- What is wrong now: dead PCM, cranks-no-start after swap, theft light flashing, water damage, etc.
- Whether the vehicle has PATS (theft light on the dash) and how many working keys you have
- Proof of ownership (title, registration, or bill of sale)
- Your name, return address, and phone number
Ship to
Auto Module Lab
If shipping USPS
PO Box 120241
Arlington, TX 76012
If shipping UPS or FedEx
1009 Oakwood Ln # 120241
Arlington, TX 76012
Both shipping labels — to the lab and back to you — are purchased the moment you order. Your prepaid inbound label (already addressed) arrives by email; the return ships on the speed you chose at checkout.
Need to perform this job remotely?
Get an Auto Module Lab Remote Programming Kit and have our technicians program supported vehicles from your shop — the car stays on your lift and nothing gets posted.
Buy the interface once — program with us anytime. Supported procedures vary by vehicle, module, OEM software and security requirements.
Frequently Asked
Still have a question? Text us — replies in minutes.
Which Fords does this service cover?
What is an EEC-V PCM and how do I know I have one?
Will this be a true plug-and-play clone?
What happens with PATS — will my keys still work?
How do I pick a compatible donor PCM?
My original PCM is completely dead — can you still program a donor?
Do you cover the 7.3L Power Stroke diesel?
My Ford is a 2005 or newer — does this apply?
How much is it and how fast?
Related Services
Other bench services for the same brand or use case.
Ford PATS Delete (1996+)
Ford theft light flashing with no matched keys left? We disable PATS at the PCM level — the engine runs without transponder authentication.
Ford PCM Clone / VIN Transfer
Used Ford PCM that cranks but won't start? We clone your original onto it — VIN, PATS security, and strategy carried over so it installs plug-and-play.
Ford PCM — Programmed & Ready to Install
Ford that cranks but won't start, or a theft light that won't clear? F-150, Expedition, Mustang, Explorer and Crown Vic PCMs supplied and flashed to your VIN with PATS handled.
Where we serve Ford EEC-V PCM Clone / Programming
Mail-in means nationwide. See your state, metro, or specific vehicle:
Ready to ship?
Pay now, get the shipping address by email, drop it in the mail. Your module is back on your bench within a week.