GM ABS / EBCM Module Programming & Setup Service
ABS light still on after swapping in a replacement EBCM? We program and configure the module to your VIN — the setup step a new module needs to work.
Sending several modules? Add them all — one box, one return-shipping charge.
GM Global-A EBCM — 2014-2020 Silverado/Sierra 1500, 2500/3500, Tahoe/Suburban/Yukon/Escalade, Colorado/Canyon
How It Works
Three simple steps. Hundreds of mail-in jobs completed for shops, locksmiths, and DIY pros.
Pay & Get Address
Click "Order Now", pay securely via Stripe. We email shipping address + instructions within minutes.
Ship Your Module
Pack per the instructions and ship to Arlington. USPS goes to our PO Box; UPS and FedEx must use the street address. Customer pays shipping to us.
Receive in 1-2 Days
Work completed within 24 hours of receipt. Ships back next business day at the return speed you chose at checkout — standard to overnight. Tracking emailed.
What You Get
- EBCM programmed and configured to your VIN and options
- New or donor module set up so it communicates and drops in
- Bench-verified before it ships
- 24-hour turnaround after the module is received
- Return shipping your choice at checkout — standard, 2-day, or overnight
- 6-month warranty on programming work
Compatibility
Confirm your part matches one of the variants below before ordering. Not sure? Text us a photo and we'll verify.
GM trucks/SUVs
Module scenarios
What we set
Will This Fix My Problem?
Honest answer: here's exactly what this service fixes — and what it doesn't.
Fixes:
- ✓Replaced the ABS/EBCM and now it will not communicate
- ✓Used EBCM from another truck — needs VIN programming to work
- ✓ABS, brake, and traction lights on after a module swap
- ✓New EBCM installed but the truck does not recognize it
Won't fix:
- ✗A faulty EBCM that needs board-level repair (see ABS Module Repair)
- ✗Wheel-speed sensor, tone-ring, or wiring faults (module only)
- ✗Hydraulic problems requiring a brake bleed (done at install)
- ✗Post-2020 T1 trucks / different EBCM architecture
Bought a replacement ABS module and the lights are still on?
A new or used GM EBCM is not plug-and-play on its own — it has to be programmed to your VIN and configured to your truck before it will communicate and clear the ABS/brake/traction lights. Ship the module in and we do exactly that on the bench, so it drops in ready. The hydraulic bleed and any on-car relearn are finished when you install it.
Shipping Instructions
These details are also emailed to you the moment your payment clears.
Verify first: text or email us your VIN and the module part number and we confirm coverage before you ship. You pay shipping to us — USPS to PO Box 120241, Arlington TX 76012, or UPS/FedEx to 1009 Oakwood Ln # 120241, Arlington TX 76012 (UPS and FedEx cannot deliver to a PO Box). Return shipping is selected and paid at checkout — Standard $24.95 (3–5 days), UPS 2-Day $54.95, or UPS overnight $94.95.
What to include in your box
- Your GM ABS / EBCM (Electronic Brake Control Module)
- A printed copy of your order confirmation email
- VIN of the truck/SUV + the module part number from the label
- Your name, return address, and phone number
Ship to
Auto Module Lab
If shipping USPS
PO Box 120241
Arlington, TX 76012
If shipping UPS or FedEx
1009 Oakwood Ln # 120241
Arlington, TX 76012
Both shipping labels — to the lab and back to you — are purchased the moment you order. Your prepaid inbound label (already addressed) arrives by email; the return ships on the speed you chose at checkout.
Need to perform this job remotely?
Get an Auto Module Lab Remote Programming Kit and have our technicians program supported vehicles from your shop — the car stays on your lift and nothing gets posted.
Buy the interface once — program with us anytime. Supported procedures vary by vehicle, module, OEM software and security requirements.
Frequently Asked
Still have a question? Text us — replies in minutes.
Why won't my new ABS module just work?
Is this the same as your ABS module repair?
Can I use a used EBCM from another truck?
Will I need to bleed the brakes after install?
Which trucks are covered?
Related Services
Other bench services for the same brand or use case.
GM Cluster Upgrade + Mileage Program
Dead gauges, dim display, or want the higher-trim cluster? We upgrade and program your GM instrument cluster with the mileage and VIN carried over correctly.
GM BCM Standalone Clone (2003-2015)
Failed GM BCM taking your lights, locks, and anti-theft with it? We clone a working BCM to a replacement — VIN, mileage, theft system and all coding preserved.
GM Global A Virginize (Used ECM)
Used Global A ECM that SPS refuses to program? We reset it to a virgin, unmarried state so GM SPS / TIS2Web will take it to your VIN.
Where we serve GM ABS / EBCM Programming (K2)
Mail-in means nationwide. See your state, metro, or specific vehicle:
Ready to ship?
Pay now, get the shipping address by email, drop it in the mail. Your module is back on your bench within a week.